Epson DS-790WN

Software for Setting Up
Set up using Web Cong or Epson Device Admin.
❏ When you use Web
Cong
, you can set up the scanner only by using a web browser.
“Web
Cong
” on page 34
❏ When you use Epson Device Admin, you can set up multiple scanners at once using a conguration template.
“Epson Device Admin” on page 35
Updating the Scanner's Firmware
Before enabling Authentication Settings, update the scanner's
rmware
to the latest version. Connect the scanner
to the Internet in advance.
c
Important:
Do not turn o the computer or the scanner while updating.
When setting up from Web Cong:
Select the Device Management tab > Firmware Update, and then follow the on-screen instructions to update the
rmware.
When setting up from Epson Device Admin:
Select Home > Firmware > Update on the device list screen, and then follow the on-screen instructions to update
the
rmware.
Note:
If the latest rmware is already installed, you do not need to update.
Connecting and Conguring an Authentication Device
If you want to connect and use an authentication device such as an IC card reader, you rst need to congure the
device. is is not necessary if you are not using an authentication device.
Related Information
& “Connecting Authentication Device” on page 127
& “Authentication Device Settings” on page 128
Card Reader Compatible List
is list does not guarantee operations for the card readers in the list.
Yes: Supported
(e
ID information can be read with standard card reader settings.)
No: Not Compatible
Authentication Settings > Connecting and Conguring an Authentication Device > Card Reader Compatible List
124