Epson DS-790WN

Local DB LDAP Local DB and LDAP
User
informatio
n location
Scanner's memory
This authentication method
checks the user information
registered to the scanner and
compares it with the user who is
using the scanning function.
LDAP server
*
This authentication method
checks the user information of
the LDAP server synchronized
with the scanner. Since up to 300
items of user information from
the LDAP server can be
temporarily stored in the scanner
as a cache, authentication can be
performed using the cache if the
LDAP server goes down.
*
A server that provides a directory
service that can communicate
with LDAP.
Scanner's memory and LDAP
server
Check the user information
registered in the scanner rst (
A
),
and if there is no match, check
the user information against the
LDAP server (
B
).
Number of
registered
users
50 (scanner's memory) Unlimited (LDAP server) 50 (scanner's memory)
Unlimited (LDAP server)
Scanner's
memory
cache
- 300 Max 300
(50 of the cache slots are shared
with User Settings in Local DB)
Login
methods
You can use any of the following methods.
❏ Hold up an authentication card, or enter a User ID and Password
❏ Hold up an authentication card, or enter an ID Number
❏ Enter a User ID and Password
❏ Enter a User ID
❏ Enter an ID Number
Limits of
the “Scan
to” feature
Set individually for each user Same settings for all LDAP users Local DB users: Set individually
LDAP users: Same settings for all
users
Allocating
Presets to
users
Up to 5 per user -
(Cannot be set individually)
Local DB users: Up to 5 per user
LDAP users: -
Authentication Settings > About Authentication Method
123