Epson DS-790WN

❏ Registering Multiple User Settings as a Batch Using a CSV File (Web Cong)
❏ Registering User Settings to Multiple Scanners as a Batch Using a Conguration Template (Epson Device
Admin)
Related Information
& “Registering User Settings Individually (Web
Cong
)” on page 132
& “Registering Multiple User Settings Using a CSV
le
(Web
Cong
)” on page 133
& “Registering User Settings to Multiple Scanners as a Batch (Epson Device Admin)” on page 136
Registering User Settings Individually (Web
Cong
)
Access Web Cong and select the Product Security tab > User Settings > Add, and then enter the User Settings.
Item Explanation
User ID Enter the user ID you want to use for authentication within a range of 1 to 83
bytes that can be expressed in Unicode (UTF-8).
Since the user ID is not case sensitive, you can login using upper or lower case
letters.
User name Display Enter the user name displayed on the scanner's control panel within 32 characters
that can be expressed in Unicode (UTF-16). You can leave this blank.
Password Enter the password you want to use for authentication within 32 characters in
ASCII. The password is case sensitive.
Leave this blank if you select User ID for How to Authenticate User.
Authentication Card ID Enter the authentication card ID within 116 characters in ASCII. You can leave this
blank.
When you permit Allow users to register authentication cards for
Authentication Settings, the result registered by users is reected.
ID Number This item is displayed when Card or ID Number or ID Number is selected in
Authentication Settings > How to Authenticate User.
Enter a number that falls somewhere between the number set in Authentication
Settings > The Minimum Digit Number of ID Number and is up to 8 digits.
Auto Generate This item is displayed when Card or ID Number or ID Number is selected in
Authentication Settings > How to Authenticate User.
Click to automatically generate an ID number with the same number of digits you
selected in The Minimum Digit Number of ID Number.
Department Enter the department name and so on that identies the user within 40 characters
that can be expressed in Unicode (UTF-16).
You can leave this blank.
Email Address Enter the user’s email address within 200 characters in ASCII. This is used as the
destination for Scan to My Email.
You can leave this blank.
Authentication Settings > Registering and Setting Information > Registering User Settings
132