Epson DS-790WN

Registering User Settings to Multiple Scanners as a Batch (Epson Device
Admin)
You can register User Settings used in Local DB as a batch by using an LDAP server or a CSV/ENE le.
Note:
An ENE le is a binary le provided by Epson that encrypts and saves information for Contacts such as personal
information and User Settings. It can be exported from Epson Device Admin and you can set a password. It is useful when
you want to import the User Settings from a backup
le.
Importing from CSV / ENE File
1.
Select Administrator Settings > Authentication Settings > User Settings from the
conguration
template.
2.
Click Import.
3.
Select CSV or ENE File from Import Source.
4.
Click Browse.
e le selection screen is displayed.
5.
Select the le you want to import to open it.
6.
Select an import method.
❏ Overwrite and Add: Overwrites if the same user ID exists; adds a new ID if it does not exist.
❏ Replace All: Replaces everything with the user settings you want to import.
7.
Click Import.
e setting conrmation screen is displayed.
8.
Click OK.
e validation result is displayed.
Note:
❏ If the number of imported user settings exceeds the number that can be imported, a message will prompt you to
delete some user settings. Delete any excess user settings before importing.
❏ Select the user settings you want to delete before importing, and then click Delete.
9.
Click Import.
e
user settings are imported into the
conguration
template.
Importing from the LDAP Server
1.
Select Administrator Settings > Authentication Settings > User Settings from the conguration template.
2.
Click Import.
3.
Select LDAP from Import Source.
Authentication Settings > Registering and Setting Information > Registering User Settings
136