Epson DS-790WN

4.
Click Settings.
e LDAP Server settings are displayed.
Note:
is LDAP server setting is for importing the user settings from the LDAP server. e imported (copied) user settings
are used to authenticate users by using the scanner itself.
On the other hand, when you select LDAP or Local DB and LDAP as the authentication method, users are
authenticated by communicating with the LDAP server.
5.
Set each item.
When importing user settings from an LDAP server, you can also congure the following settings in addition
to the LDAP settings.
For other items, see Related Information.
Item Explanation
LDAP Server Settings LDAP Server Type Allows you to select the type of LDAP server.
Search Settings Search Filter You can set the text used for the LDAP search lter. Select
Custom to edit the search text.
Options Type You can set the type of save destination for Scan To My
Folder.
Connection
Mode
When the Type is set to FTP, you can set the FTP connection
mode.
Port Number When the Type is set to FTP, you can set the port number you
want to use.
6.
Perform the connection test as necessary by clicking Connection Test.
Acquires and displays 10 user settings from the LDAP server.
7.
Click OK.
8.
Select an import method.
❏ Overwrite and Add: Overwrites if the same user ID exists; adds a new ID if it does not exist.
❏ Replace All: Replaces everything with the user settings you want to import.
9.
Click Import.
e setting conrmation screen is displayed.
10.
Click OK.
e
validation result is displayed.
11.
Click Import.
e user settings are imported into the conguration template.
Related Information
& “Conguring an LDAP Server” on page 138
Authentication Settings > Registering and Setting Information > Registering User Settings
137