Epson DS-790WN

Setting Basic Security Functions
Purpose Required Settings
I want to prevent anyone other than the
administrator from changing the scanner
settings.
Set an administrator password for the scanner.
“Administrator Settings” on page 80
I want to disable the use of scanners with
USB connections.
Disable the external interface.
“Disabling the External Interface” on page 86
Setting Advanced Security Functions
Purpose Required Settings
I want to control which protocols to use. Enable or disable the protocols.
“Controlling Using Protocols” on page 91
I want to encrypt the communication
path.
1. Setup your digital certicate.
“Using a Digital Certicate” on page 94
2. Setup SSL/TLS communication.
“SSL/TLS Communication with the Scanner” on page 99
I want to use encrypted communication
(IPsec).
I want to be able to use the software only
from a specic computer (IP ltering).
Setup policies for ltering trac.
“Encrypted Communication Using IPsec/IP Filtering” on page 101
I want to use a scanner in an IEEE802.1X
network.
Setup IEEE802.1X for the scanner.
“Connecting the Scanner to an IEEE802.1X Network” on page 111
Setting Functions to be Authenticated by the Scanner
Purpose Required Settings
I want to enable Authentication Settings. See the following for more information on the available Authentication
Settings and Authentication Method.
“About Authentication Settings” on page 121
“About Authentication Method” on page 122
Using a Server’s Authentication System
With Document Capture Pro Server Authentication Edition (abbreviated to Document Capture Pro Server AE),
you can build an authentication system that uses a server for authentication.
For further information, contact your local Epson oce.
Required Settings to Suit Your Purpose > Required Settings to Suit Your Purpose
11