Epson DS-790WN - Page 140

Conguring the LDAP Server Search Settings
Sets the search attributes for user settings.
When setting up from Web Cong:
Select the Network tab > LDAP Server > Search Settings (Authentication).
When setting up from Epson Device Admin:
Select Administrator Settings > Authentication Settings > LDAP server > Search Settings (Authentication)
from the
conguration
template.
Item Settings and Explanation
Search Base (Distinguished Name) Specify the start position when searching for user information from the LDAP
server. Enter between 0 and 128 characters in Unicode (UTF-8). If you do not
search for arbitrary attribute, leave this blank.
Example for the local server directory: dc=server,dc=local
User ID Attribute Specify the attribute name to display when searching for the ID number. Enter
between 1 and 255 characters in ASCII. The rst character should be a-z or A-Z.
Example: cn, uid
User name Display Attribute Specify the attribute name to display as the user name. Enter between 0 and 255
characters in ASCII. The rst character should be a-z or A-Z. You can leave this
blank.
Example: cn, name
Authentication Card ID Attribute Specify the attribute name to display as the authentication card ID. Enter between
0 and 255 characters in ASCII. The rst character should be a-z or A-Z. You can
leave this blank.
Example: cn, sn
ID Number Attribute Specify the attribute name to display when searching for the ID number. Enter
between 1 and 255 characters in ASCII. The rst character should be a-z or A-Z.
Example: cn, id
Department Attribute Specify the attribute name to display as the department name. Enter between 0
and 255 characters in ASCII. The rst character should be a-z or A-Z. You can leave
this blank.
Example: ou, ou-cl
Email Address Attribute Specify the attribute name to display when searching for email addresses. Enter
between 1 and 255 characters in ASCII. The rst character should be a-z or A-Z.
Example: mail
Save To Attribute Specify the attribute name that points to the destination for Scan To My Folder.
Enter between 0 and 255 characters in ASCII.
Example: homeDirectory
Checking the LDAP Server Connection
Performs the connection test to the LDAP server by using the parameter set on LDAP Server > Search Settings.
1.
Access Web
Cong
and select the Network tab > LDAP Server > Connection Test.
Authentication Settings > Registering and Setting Information > Synchronizing with the LDAP Server
140