The wrong character table is
selected in your software.
Select the correct character table using
your software, the default-setting
mode, or the EPSON Remote! utility.
The character table setting in your
software overrides settings made in the
default-setting mode or EPSON
Remote!.
The printer you want to use is
not selected in your software
Choose the correct printer from the
Windows desktop or in your
application before printing.
Your application software is
not correctly configured for
your printer.
Make sure that your application
software is correctly configured for
your printer. See your application
documentation. If necessary, install or
reinstall the printer driver software as
described in Chapter 2.
Software settings override
settings you make using the
default-setting mode, EPSON
Remote!, or with the control
panel buttons.
Use your application software to select
the font.
Vertical printed lines are not aligned.
Cause What to do
Bidirectional printing, which
is the printer’s standard
printing mode, may be out of
alignment.
Use the printer’s bidirectional
adjustment mode to correct this
problem. See “Aligning Vertical Lines
in Your Printout” later in this chapter.
L
Gentian Rev.c
A5 size Chapter 8
97/06/20 pass 1
8-12
Troubleshooting
To Next Page
Loading...
