What to do if self-test print is abnormal on Epson LX-300+?
If your Epson printer's self-test print is abnormal, ensure that all connectors from CN3 to CN12 are properly connected to the main board. If the printhead driver is defective, replace the main board. Adjust Bi-D if it is not correct. If the printhead is defective, replace it. If the head FFC is not connected properly or broken, replace it. You can also adjust the platen gap.
What to do if control panel and switches do not operate properly on Epson printer?
If the control panel and switches on your Epson printer do not operate properly, replace the control panel if the switch is defective or the control panel board is defective. Ensure the control panel harness is properly connected.
How to fix release lever error on Epson printer?
Reset the release lever on your Epson printer.
General| Emulation | Epson ESC/P, IBM PPDS |
|---|---|
| Print Method | 9-pin, impact dot matrix |
| Interface | Parallel |
| Paper Handling | Friction feed |
| Dimensions | 366 x 275 x 159 mm |
| Paper Width | 4 - 10 inches |
To Next Page
