Epson RC90 - Restore

Maintenance 4. Backup and Restore
4.4 Restore
Restore the Controller status from the EPSON RC+ 7.0.
CAUTION
■
Make sure that the data used for restore was saved previously for same
Controller.
■
Do not edit the backup files.
Otherwise, operation of the robot system after
data restoration to the Controller is not assured.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Controller] to display the [Controller
Tools] dialog.
(2) Click the <Restore Controller…> button to display the [Browse For Folder] dialog.
(3) Specify the folder that contains the backup data. Backup data folders are named
using the following format:
B_RC90_serial number_ date status was saved
→ Example: B_RC90_12345_2013-10-29-092951
Data saved with the Controller status storage function can also be specified for restore.
Specify the following folder.

NOTE
RC90 (EPSON RC+ 7.0) Rev.4 89