Epson RC90 - Mdb

Maintenance 7. Maintenance Parts Replacement Procedures
7.5 MDB
MDB
Removal
(1)
Turn OFF the Controller.
(2)
Unplug the power connector.
(3)
Remove
the Top Panel. (Mounting screws ×10)
(4)
Remove the output cable of each axis of the
MDB
.
(5)
Remove
the screws on the chassis side surface
(
×4).
(5)
(7)
(6)
P
ull out the MDB clamp for the upright
mounting.
(7)
R
emove the screws on the chassis side surface
(
×2).
(8)
Remove the
MDB clamp.
(Mounting screw
×2)
(9)
Pull out the
MDB
in the direction shown in the
picture.
RC90 (EPSON RC+ 7.0) Rev.4 105