Epson RC90 - Page 199

Maintenance 9. Troubleshooting
No.
Message
Remedy
Note 1
Note 2
7300
Vision Communication.
Server mode not supported.
7302
Vision Communication.
Failed to read from the camera.
Check the connection with the camera.
7303
Vision Communication.
Read data overflow.
7304
Vision Communication.
Failed to open the Ethernet port.
7305
Vision Communication.
Invalid IP address of camera.
Rebuild the project. Check the camera
configuration.
7306
Vision Communication.
No specification of Server or Client.
7307
Vision Communication.
Failed to send to the camera.
Check the connection with the camera.
7308
Vision Communication.
Camera version is old.
7321
Vision Communication.
Camera setting has not been set.
Rebuild the project. Check the camera
configuration.
7322
Vision Communication.
Read timeout.
7323
Vision Communication.
Read invalid data.
Check the connection with the camera.
7324
Vision Communication.
Failed to send to the camera.
Check the connection with the camera.
7325
Vision Communication.
Connection is not completed.
Check the connection with the camera.
7326
Vision Communication.
Read data is too long.
7327
Vision Communication.
Undefined vision sequence.
7328
Vision Communication.
Camera setting has not been set.
Rebuild the project. Check the camera
configuration.
7329
Vision Communication.
Vis file was not found.
Rebuild the project. Check the camera
configuration.
7330
Vision Communication.
Failed to allocate memory.
7341
Vision Communication.
Out of max camera number.
7342
Vision Communication.
Invalid camera number.
7343
Vision Communication.
VSet parameter is too long.
7344
Vision Communication:
Too many parameters for VGet.
7345
Vision Communication.
Not enough data for VGet statement
variable assignment.
7346
Vision Communication.
Cannot execute a Vision statement
from the command window.
7500
Smart camera.
Out of memory.
7501
Smart camera.
Project does not exist.
7502
Smart camera.
Project has not been set.
RC90 (EPSON RC+ 7.0) Rev.4
183