Epson Stylus Pro 9000 - Paper-Feed Specifications; Print Specifications; Specifications

EPSON Stylus Pro 9000 Revision B
Product Description SPECIFICATIONS 12
1.2 SPECIFICATIONS
PRINT SPECIFICATIONS
Print method: On-demand MACH (Multi-layer Actuator Head) ink
jet E-MACH type
Nozzle configuration: Black: 64 nozzles
Color: 320 nozzles/64 nozzles for each color (Yellow,
Magenta, Cyan, Light Magenta, and Light Cyan)
Print direction: Bi-directional with logic seeking
(high-speed return and skip only)
Print speed: See the following table:
Control code: ESC/P Raster (commands are not open to public)
PAPER-FEED SPECIFICATIONS
Feeding method: Friction feed
Line spacing: 1/6 or 1/720” programmable
Paper loading: Roll paper (two 2-inch rolls can be loaded at the
same time)
Single sheets loaded one at a time
Paper volume: 2” core roll paper = diameter of paper wound on roll
of less than 103mm (4.05”)
3” core roll paper = diameter of paper wound on roll
of less than 150mm (5.9”)
Single sheets = one sheet at a time
Feed speed: 200 ± 10 ms (when feeding at 1/6”)
2.5”/second (when continuously feeding)
Table 1-2. Print Speed
Print Mode A0 Print Time Environment
Matte Paper Approx. 15 min.
• Speed selected in printer driver
• 720 x 360 dpi
• Mode = Bi-D/FOL/300cps
Glossy Paper Approx. 30 min.
• Quality selected in printer driver
• 720 x 720 dpi
• Mode = Bi-D/FOL/300cps
Glossy Paper Approx. 55 min.
• Advanced Photo selected in
printer driver
• 1440 x 720 dpi
• Mode = Bi-D/4-pass FOL/300cps