EPSON Stylus Pro 9000 Revision B
Product Description SPECIFICATIONS 16
Paper Release Lever: {
Release lever is up
}
The feed path is open and you can load, remove or
change the position of paper in the feed path.
{Release lever is down}
The feed path is closed and loaded paper is locked in
place. You can print on the loaded paper.
(It is not possible to change the lever position during
printing.)
ELECTRICAL SPECIFICATIONS
CONFORMITY/SAFETY APPROVALS
Safety Standards:
US Model UL 1950, CSA 22.2 No. 950
European Model EN60950 (VDE)
EMC:
US Model FCC part 15 subpart B class B
CSA C108.8 class B
European Model EN 55022 (CISPR Pub. 22) class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC 801-2
IEC 801-3
IEC 801-4
Australian Model AS/NZS 3548 class B
International Energy Star Compliant
(EPA MOU2.1 Category Large Format Printer)
RELIABILITY
Useful life: Printer = 18,000 pages at B1 size
Printheads = 2,000,000,000 dots/nozzle
Cutter = 2,000 times
Table 1-7. Print Area/Margin Optimization for Roll Paper
To Optimize for Select this setting
largest printable area and decrease chance of paper
rubbing printheads
Top/Bottom 15mm
exact paper size and decrease chance of paper rubbing
printheads
15mm
largest printable area and exact paper size 3mm
Table 1-8. Electrical Specifications
100V Model 220-240V Model
Rated voltage range AC100~240V
Input voltage range AC90~264V
Rated frequency range 50 to 60Hz
Input frequency range 49 to 61Hz
Rated current 1.0A 0.5A
Power consumption
operating = 100W or less
standby mode = 30W or less
Insulation resistance 10MΩ minimum (between AC line and chassis, DC 500 V)
Dielectric strength
AC 1.0KVrms per minute
AC 1.2KVrms per second
Current leakage 0.25mA maximum
To Next Page
Loading...
