Epson Stylus Pro 9000 - Unexpected Printing Issues

EPSON Stylus Pro 9000 Revision B
Adjustment Adjustment Steps 122
ADJ BI-D
This function adjusts the Bi-D print position for both printheads. The printer
prints a test pattern in both directions (toward the HP and away from the
HP), and lines that do not line up vertically indicate the heads need Bi-D
adjustment. The Bi-D adjust items are shown in the table below.
Note: The number refers to the numbered pattern on the printed Bi-D test pattern.
1. Make sure "Bi-D" appears on the LCD, and press the Enter button.
2. After all the patterns print, "BiD, 200, N, B: xxx" appears in the LCD.
Figure 5-6. Bi-D Adjustment Test Pattern
Table 5-6. Bi-D Adjust Items
Item Description Number
BiD/200/N/B Bi-D adjustment/200cps/Normal-dot/B head 1
BiD/200/N/C Bi-D adjustment/200cps/Normal-dot/C head 2
BiD/200/M/B Bi-D adjustment/200cps/Micro-dot/B head 3
BiD/200/M/C Bi-D adjustment/200cps/Micro-dot/C head 4
BiD/300/N/B Bi-D adjustment/300cps/Normal-dot/B head 5
BiD/300/N/C Bi-D adjustment/300cps/Normal-dot/C head 6
BiD/300/M/B Bi-D adjustment/300cps/Micro-dot/B head 7
BiD/300/M/C Bi-D adjustment/300cps/Micro-dot/C head 8
Please Set Paper
Printing Pattern
[SelecType]/[Item]
BiD, XXX, Y, Z: O
XXX="300" or "200"/
Y="N" or "M"
Z="B" or "C"
Based on the printed pattern, make sure each
numbered pattern is vertically aligned.
[Enter]
End
adjustment/
next menu
Bi-D End
#1
#2
#3
#4
#5
#6
#7
#8