Epson Stylus Pro 9000 - Chapter 4: Paper Handling

EPSON Stylus Pro 9000 Revision B
Disassembly & Assembly Disassembly Flow 79
UPPER PAPER GUIDE REMOVAL
1. Remove the Maintenance Cover as described in “Maintenance Cover
Removal” on page 73.
2. Remove the H Top Cover as described in “H Top Cover Removal” on
page 74.
3. Open the Roll Cover.
4. Remove the seven screws (CP(W2) M3x6) that secure the Upper Paper
Guide, and then remove the Upper Paper Guide.
Figure 4-13. Upper Paper Guide Removal
CHECK
PO INT
When removing or re-installing the Upper Paper Guide, be
sure the Paper Release lever is set to the Lock (lower)
position; otherwise the Grid Roller Assembly is in the way.
CP(W2) M3x6