Epson Stylus Pro 9000 - Printer Status Menu; Test Print Menu; User Paper Settings

EPSON Stylus Pro 9000 Revision B
Product Description Control Panel 23
TEST PRINT MENU
PRINTER STATUS MENU
All consumable items and maintenance parts either run out of their contents or
wear out. To determine how much contents (ink) or useful life remains,
compare the message and value shown on the control panel display to the
corresponding value below and the messages in the table below.
E*****F 100~81% full/life remaining
E**** F 80~61% full/life remaining
E*** F 60~41% full/life remaining
E** F 40~21% full/life remaining
E* F 20~1% full/life remaining (generates a warning)
E F Less than 1% full/life remaining (generates an error)
USER PAPER SETTINGS
Note: The underlined item equals the default.
Table 1-17. Test Print Menu
Display Message Item Notes
NOZZLE CHECK
PATTERN
Print
Check the printout, any missing lines mean
the nozzle(s) are clogged.
STATUS SHEET Print Prints the current printer settings.
Table 1-18. Printer Status Menu
Display message Meaning
VERSION Shows the firmware version.
INK REMAINING (C) Shows the amount of remaining ink - Cyan
INK REMAINING (M) Shows the amount of remaining ink - Magenta
INK REMAINING (LC) Shows the amount of remaining ink - Light Cyan
INK REMAINING (LM) Shows the amount of remaining ink - Light Magenta
INK REMAINING (Y) Shows the amount of remaining ink - Yellow
INK REMAINING (K) Shows the amount of remaining ink - Black
CUTTER LIFE Shows the remaining useful life of the cutter
TOTAL PRINTS Shows the total number of printed documents
WASTE INK Maintenance information
CR MOTOR Maintenance information
PF MOTOR Maintenance information
HEAD UNIT Maintenance information
CLEANING UNIT Maintenance information
Table 1-19. User Paper Settings Menu
Display Message Item Notes
PAPER NUMBER
Standard
1~4
Select Standard for Epson special paper.
Select the appropriate number for thick
paper.
THICKNESS
PATTERN
Print
Prints a pattern to detect the paper
thickness. If “Paper Number” is set to
“Standard”, this message does not appear.
PAPER
THICKNESS NO.
1~17
If “Paper Number” is set to “Standard”, this
message does not appear.
DRYING TIME 0~30 Minutes
Determines the length of time the printer
allows the ink to dry. When printing on roll
paper, the printer will wait the specified time
after printing
Table 1-18. Printer Status Menu (continued)
Display message Meaning