EPSON Stylus Pro 9000 Revision B
Adjustment Adjustment Steps 130
COUNTER CLEAR
This function resets (to the original condition) the following counters which are
stored in memory on the Main Board.
Note *: "1" means the flag is set, and the next time power is turned on the printer will
perform an initial ink charge.
Table 5-9. Counters Reset by "Counter Clear"
Counter Reset Value
Protection Counter A/B 0
Ink Volume Counter Rb/ Ry/ Rx Rz 0
Consumed Ink Counter Cb/ Cy/ Cm/ Cc/ Cml/ Ccl 0
Power Cutoff Timer T2 0
Accumulated Prints Timer 0
CL Timer 0
CL Timer 3 0
CL Flag 0
Initial Charge Flag 1*
Periodic Pseudo-Vacuum Flag 0
To Next Page
Loading...
