Epson Stylus Pro 9000 - Performance and Paper Feed Issues

EPSON Stylus Pro 9000 Revision B
Adjustment Adjustment Steps 135
ENCODER
This function confirms the operation of the CR Motor and PF Motor encoders.
To check an encoder, follow the instructions below for the corresponding
encoder.
o CR encoder: Move the carriage left and right by hand
o PF encoder: Turn the Grid Roller by hand
FAN
This function confirms the operation of the paper vacuum fans. When this item
is selected, the fan turns on. Press the Pause button to turn the fan off and
proceed to the next item.
ELEC.
This function allows you to check the operation-record information and the
fatal-error record stored in the control circuit. See the Error Message List for
Service Technicians table on page 58 for details on the error messages.
o Record: Error menu
The errors listed here do not include CPU errors (service call errors), and
the printer lists a maximum of the most recent seven fatal errors, Error 0~6.
[Pause] returns you
to previous menu
[SelecType]
[Item]
Encoder: CR XXXX
Encoder: PF XXXX
[Pause] returns you
to previous menu
Fan: Pause
[Pause] returns you
to previous menu
[SelecType]
[Item]
[Enter]
Other
menus
[Pause]
Record:Maintenance
Record:Error
[Pause] returns you
to previous menu
[SelecType]
[Item]
Lists up to seven errors
Error0: XXXXXXXX
Error1: XXXXXXXX