Epson Stylus Pro 9000 - Page 14

EPSON Stylus Pro 9000 Revision B
Product Description SPECIFICATIONS 14
Size, single sheets { Minimum paper requirements }
Paper meeting the requirements described below
can be used with this printer, but neither the feeding
nor printout quality is guaranteed.
Paper Thickness: 420~728mm (16.54~28.66”) long
paper = 0.08~1.5mm
(0.003~0.059”)
728~1580mm (28.66~62.2”) long
paper = 0.08~0.5mm
(0.003~0.019”)
{
Normal paper }
For paper meeting the following requirements, only
the feeding operation is guaranteed.
Paper Thickness = 0.08~0.11mm (0.003~0.0043”)
•Paper Weight = 64~90gf/m
2
(17~24 lb.s)
Paper Quality: Normal, recycled paper
*1: Load short edge first (portrait)
{
Special paper }
For special paper meeting the following
requirements, the feeding operation and print quality
are optimized.
Notes:
*1: Print quality optimized when printing uni-direction printing
*2: Japan only
Table 1-4. Usable Single Sheet Paper Specifications
Size
Dimensions
(W x H)
Size
Dimensions
(W x H)
B0 Wide 1118 x 1580mm A2 420 x 594mm
B0 1030 x 1456mm A3 Wide/B 329 x 483mm
B1 728 x 1030mm A3 297 x 420mm
B2 515 x 728mm ANSI E 34 x 44”
B3 364 x 515mm ANSI D 22 x 34”
A0 Wide 914 x 1292mm ANSI C 17 x 22”
A0 841 x 1189mm
ANSI B 11 x 17”
A1 594 x 841mm
Table 1-5. Special Paper Specifications
Size
Dimensions
(W x H)
SuperFine
*1
PhotoPrint
Paper 2
Glossy Film
A3 297 x 420mm OK OK OK
*2
A3 Wide 329 x 483mm OK OK OK
A2 420 x 594mm OK - -