EPSON Stylus Pro 9000 Revision B
4
Revision Status
Revision Issued Date Description
A 1/26/1999 Original
B 5/28/1999
The following chapters are revised:
Chapter-1: descriptions for firmware update procedures are corrected.
Chapter-2: descriptions for electrical circuit operation are added.
Chapter-3: Note on using self-diagnostic mode is added.
Chapter-4: instructions on disassembling the ink system components
are added.
Chapter-5: New tool informaiton is added / “CR Cover position
adjustment” procedure is modified. / Paper sensors adjustment is
added.
To Next Page
Loading...
