Epson STYLUS PRO 9400 - Page 213

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 213
Figure 4-2. Disassembly Process Flowchart
Maintenance Tank (p.217)
Spindle (p.219) H TOP COVER ASSY. (p.221)
Cutter (p.218)
PANEL ASSY. (p.220)
Cutter (p.218)
FRONT COVER ASSY. (p.230)
Front Sensor (p.231)
L SIDE COVER ASSY. (p.224)
BOARD ASSY., SUB; B (p.238)
CR BELT (p.240)
HOLDER ASSY., IC, RIGHT (p.275)
PUMP CAP ASSY. (p.284)
CLEANER, HEAD, A, ASP (p.287)
BOARD ASSY., SUB; C (p.239)
CR MOTOR ASSY. (p.243)
SCALE, CR (p.251)
PF MOTOR ASSY. (p.255)
SCALE, PF (p.260)
CUTTER SOLENOID ASSY. (p.248)
P Edge Sensor (p.265)
I/H COVER R ASSY. (p.222)
I/H COVER L ASSY. (p.222)
IM (Ink Mark) Sensor (p.263)
HOLDER ASSY., IC, LEFT (p.279)
BOX ASSY., FLUSHING (L) (p.290)
Ink Cartridges (p.216)
I/H COVER L ASSY. (p.222)
L SIDE COVER ASSY. (p.224)
Spindle (p.219) H TOP COVER ASSY. (p.221)Maintenance Tank (p.217)
BOARD ASSY., SUB (p.236)H TOP COVER ASSY. (p.221)
PG HP Sensor (p.245)
P Rear Sensor (p.262)
CR Encoder Sensor (p.246)
PRINT HEAD (p.267)
I/H COVER R ASSY. (p.222)Ink Cartridges (p.216)
COVER, REAR (p.225) BOARD ASSY., MAIN (p.232)
P/S BOARD ASSY. (p.234)
P GUIDE L ASSY. (p.227) VACUUM FAN ASSY. (p.252)FRONT COVER ASSY. (p.230)
Spindle (p.219) ROLL TOP COVER (p.228)
CR HP Sensor (p.244)
P Thick1 Sensor, P Thick2 Sensor (p.261)
VALVE ASSY., HEAD; C (p.271)
INLETS ASSY. (p.235)
PUMP ASSY., SUPPLY (p.291)
I/H COVER L ASSY. (p.222)
BOX ASSY., FLUSHING (R) (p.288)
R SIDE COVER ASSY. (p.223)
PF Encoder Sensor (p.258)
Ink Cartridges (p.216)
START
Note : Parts or units indicated in broken lines do not mean that they can be omitted to disassemble.
They also should be disassembled for disassembling the following parts or units in the flow.