Epson TM-C3500 Series Technical Reference Guide

Chapter 3 Handling
109
3
Barcode and 2D Symbol Font Printing on .NET Environment
Since .NET Framework supports only True Type font and Open Type font, the barcode and 2D
symbol font which are registered in the printer driver can not be printed from the application.
Therefore, True Type font is replaced with barcode and 2D symbol font by using font
replacement function of the printer driver. Barcode and 2D symbol fonts can be printed from the
appl
ication under .NET Framework environment by this replacement function.
The name of the print data in the application remains as True Type font name, but changes to
barcode and 2D symbol font when it is printed.
Font Replacement
Font Replacement is executed from [Font Replacement] on [Driver Utilities] tab.
1
Make the following setting.
•True Type font to be replaced
 Select [True Type Font].
•Font to replace
 Select barcode and 2D symbol font to replace.
2
Click [OK].
True Type font is replaced by barcode and 2D symbol font.

Epson TM-C3500 Series Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 720 x 360 dpi
Ink Type	Pigment-based ink
Interface	USB 2.0, Ethernet
Media Handling	Roll paper
Operating System Support	Windows, Mac OS
Dimensions	310 x 283 x 261 mm
Weight	Approx. 12 kg
Media Width	30 to 112 mm
Media Type	Synthetic
Cutter	Auto cutter
Ink Cartridges	Individual ink cartridges (cyan, magenta, yellow, black)
Print Speed	Up to 103 mm/sec