34
Setting Up the Printer
Set up the printer using Install Navi. Install Navi is included in the supplied CD-ROM.
1
Turn on the computer to be connected to the printer.
2
Make sure that the printer is turned off.
3
Set the CD-ROM in the computer, and Launcher automatically starts up.
Click [Setup] to start InstallNavi.exe.
4
When Install Navi is executed, the following window appears. Agree to
the license agreement and click [Next], and the software installation
starts. Set up the printer according to the displayed instruction.
Be sure to turn the printer off.
To Next Page
Loading...
