Epson TM-C3500 Series Technical Reference Guide

22
Beeper
When an error occurs while “Beep Notification Setting at an Error” is enabled, the beeper
performs “Sound the beeper on an error” shown in the below table. The beeper continues to
beep until all the causes of error are removed.
When "Settings For Paper Handling After Print" - "Notification" is enabled, the printer performs
“Beeper sound when the printer is not
in an error state” shown in the below table.
❏ Frequency: Fixed to approximately 2.5 kHz
❏ Volume control: 2 levels on the hardware
Sounding
period
Silent
period
Number of
the pattern
repeated
Overall
time
Number of
times
repeated
Printer event
500ms 300ms 3 5 seconds
Until the
error factor
is removed.
Sound the beeper on an error
 Service required
 Printer error
 Roll paper cover open
 Ink cartridge cover open
 Replace ink cartridge
 No ink cartridge
 Ink cartridge read error
 Maintenance box cover open
 Replace maintenance box
 No maintenance box
 Maintenance box read error
 Media form error
 Media size error
 Paper jam error
 Paper removal error
 Paper out error
300ms - None - 1
Beeper sound when the printer
is not in an error state
 Every page
 The final page only
 The volume can be set using the DIP switch. See "Setting the DIP Switches" on page
48.
 When the paper is in “Paper out” status, which is without printing data, the beeper does
not sound.

Epson TM-C3500 Series Specifications

General

Brand	Epson
Model	TM-C3500 Series
Category	Printer
Language	English