152
Error Recovery Method
The following table shows the error recovery methods.
LCD display Description Recovery method
MEDIA FORM ERROR
The type of the paper set in the
printer is different from the
specified type set for "Media
detection settings".
Set the type of paper specified for
"Media detection settings".
Change the settings for "Media detec-
tion settings" to that is suitable for the
loaded paper.
For more information on the confirmation
method and how to make settings for
Media detection settings, see "Media
detection settings" on page 115
MEDIA SIZE ERROR
The paper size is inappropriate
for the print area.
Set the paper whose size matches the
print area.
Change the print area to that suitable
for the loaded paper.
PAP E R JA M E R R ##
##:59
Roll paper is installed to the
printer set on fanfold paper.
Set the type of paper specified for "Media
source".
Set the paper, "Replacing Roll Paper with
Fanfold Paper" on page 66 or "Replacing
Fanfold Paper with Roll Paper" on page 76.
PAP E R JA M E R R ##
##:01 to 0E, 44, 55 to
5C, 80
The paper is jammed. Check the paper path for a paper jam. If
jammed paper is found, remove it com-
pletely.
Set the paper, "Replacing Roll Paper with
Fanfold Paper" on page 66 or "Replacing
Fanfold Paper with Roll Paper" on page 76.
PAPER JAM ERR ##
##: 81
Fanfold paper is loaded when
the media settings are set to
roll paper.
Load the paper that matches the media
settings.
For details on how to load paper, see
"Replacing Roll Paper with Fanfold Paper"
on page 66 or "Replacing Fanfold Paper
with Roll Paper" on page 76.
PAPER REMOVAL ER
Fanfold paper is inserted when
fanfold paper still remains in
the printer.
Pull out the fanfold paper that remains in
the paper exit. insert fanfold paper into the
fanfold paper slot at the back of the
printer.
PAPER OUT Paper is out. Set the paper, "Replacing Roll Paper with
Fanfold Paper" on page 66 or "Replacing
Fanfold Paper with Roll Paper" on page 76.
PAPER OUT ERROR
Paper is out.
To Next Page
Loading...
Need help?
General
