Epson TM-C3500 Series Technical Reference Guide

136
Sensor Adjustment
The threshold for the sensor can be adjusted when the sensor does not detect the label gap and
black mark for the paper to be used. Follow the steps below to make adjustment.
1
Load the paper to the printer.
2
Turn the printer on.
3
Display the printer driver window.
(See "How to Display the Printer Driver" on page 43.)
4
Select [Printer Utilities] tab and click [Printer Setting Utility] under [Printer
Preferences].
5
TM-C3500 PrinterSetting window appears. Select [Printer Adjustment] -
[Adjustment ].
6
"Sensor Adjustment" window appears. Click [Start adjustment] for the
sensor to be adjusted.
7
The confirmation window appears. Click [Yes] to send the settings to the
printer.

Epson TM-C3500 Series Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 720 x 360 dpi
Ink Type	Pigment-based ink
Interface	USB 2.0, Ethernet
Media Handling	Roll paper
Operating System Support	Windows, Mac OS
Dimensions	310 x 283 x 261 mm
Weight	Approx. 12 kg
Media Width	30 to 112 mm
Media Type	Synthetic
Cutter	Auto cutter
Ink Cartridges	Individual ink cartridges (cyan, magenta, yellow, black)
Print Speed	Up to 103 mm/sec