Chapter 3 Handling
113
3
3
Click [OK].
The settings for paper handling after print are applied and saved.
Item Description
Auto Cut
After Every Page
After printing, the paper is fed to the position where
autocutting is possible and is automatically cut on a
page-by-page basis. When resuming printing, the
paper is fed in the reverse direction to the printing posi-
tion and then printing resumes.
Only After Last
Page
After printing, the paper is fed to the position where
autocutting is possible and only the last page is auto-
matically cut. When resuming printing, the paper is fed
in the reverse direction to the printing position and then
printing resumes.
After Specified
Number Of Page
Specify the cut interval.
After printing, the paper is fed to the position where
autocutting is possible and is automatically cut at
specified intervals. When resuming printing, the paper
is fed in the reverse direction to the printing position
and then printing resumes.
No Auto Cut
Feed To Peel Off
Position
After printing, the paper is fed to the position where
autocutting is possible, and stops without performing
autocutting. Paper cutting is possible with the CUT but-
ton. When resuming printing, the paper is fed in the
reverse direction to the printing position and then print-
ing resumes.
Feed To Cut
Position
After printing, the paper is fed to the position where
peeling is possible, and stops. Paper cutting is possible
with the CUT button. When resuming printing, the
paper is fed in the reverse direction to the printing posi-
tion and then printing resumes.
To Next Page
Loading...
Need help?
General
