Epson TM-C3500 Series - Page 134

134
Print Start Position Adjustment (Vertical Direction)
The paper feed pitch is adjusted as described below depending on the [Media detection settings].
Media detec-
tion settings
Description
Die-cut label
(Gap)
Transparent die-
cut label
 Specifying a positive value moves the print start position and cut position
away from the reference position (top of label).
 Specifying a negative value moves the print start position and cut position
closer to the reference position (top of label).
Die-cut label
(Blackmark)
 Specifying a positive value moves the print start position and cut position
away from the reference position (blackmark position).
 Specifying a negative value moves the print start position and cut position
closer to the reference position (blackmark position).
≎
≐
≎
≐
Backing paper
Label
Label
Print result
Print reference
(Top of label)
Print start position
Cut position
≎
≐
≎
≐
Backing paper
Label
Label
Print result
Print reference
(Black mark position)
Print start position
Cut position