Epson TM-C3500 Series Technical Reference Guide

Chapter 6 Appendix
209
5
Die-cut label(Gap)
Media type Plain label / Matte label / Synthetic label / Glossy label
Media source Roll paper
Backing paper width 30 to 112 mm {1.18 to 4.41"}
Label width 25.4 to 108 mm {1 to 4.25"}
Label length 8 to 1,117.6 mm {0.32 to 44"}
Gap between labels 3 to 6 mm {0.12 to 0.24"}
Left and right outer edges 2 mm  0.5 mm {0.079  0.02"}
Label edge R 1.5 mm {0.059"} or less
Paper thickness Plain label / Matte label / Synthetic label: 
0.129 to 0.195 mm {0.005 to 0.008"}
Glossy label: 
0.184mm {0.007"}
Paper core Plan label / Synthetic label: 
External diameter: 44.1 mm {1.74"} or more
Matte label / Glossy label: 
External diameter: 56.8 mm {2.24"} or more
External diameter Maximum 101.6 mm {4"}
Winding direction Printing face must be facing outside.
Form of perforated line Plain media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut
Fine media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut
PET film : 0.6 mm uncut, 8.4 mm cut
 Do not use the paper with a hole or cutout.
 If the backing is synthetic media or film, it will be difficult to cut by hand even if there is a
perforation, so do not use the perforation.
Label width
Edge cutoff
Edge cutoff
Backing paper width
Label length
Gap between
labels
Edge R
Backing paper
Label area

Epson TM-C3500 Series Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 720 x 360 dpi
Ink Type	Pigment-based ink
Interface	USB 2.0, Ethernet
Media Handling	Roll paper
Operating System Support	Windows, Mac OS
Dimensions	310 x 283 x 261 mm
Weight	Approx. 12 kg
Media Width	30 to 112 mm
Media Type	Synthetic
Cutter	Auto cutter
Ink Cartridges	Individual ink cartridges (cyan, magenta, yellow, black)
Print Speed	Up to 103 mm/sec