EasyManua.ls Logo

Epson TM-C3500 Series - Page 216

Epson TM-C3500 Series
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
216
When "Borderless Printing" is enabled
Top, bottom, left, right margins: 0 mm (Typical value)
If you enabled "Borderless Printing", printing is done with settings for no margins, but the
printing might protrude beyond the paper/label, depending on the actual print position
and the set position for the paper/label. To make sure printing does not protrude out,
ensure margins of 1.5 mm {0.06"} or more in the print data.
Even if "Borderless Printing" is enabled, the maximum value for the print area width is
104 mm {4.09"}.
Center of paper width
Auto-cut position
Auto-cut position
Paper width
Paper width
15.0 mm or more
(When auto cut is not per-
formed: 8.0 mm or more)
Paper feeding direction
Print area
Paper

Table of Contents

Other manuals for Epson TM-C3500 Series

Related product manuals