EasyManua.ls Logo

Epson TM-C3500 Series - Page 235

Epson TM-C3500 Series
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 Appendix
235
5
When “Borderless Printing“ is enabled
Top, bottom, left. right margins: 0 mm (Typical value)
Do not print inside or within 2 mm {0.08"} around the snap button mounting hole to pre-
vent damage to the mechanical functions.
If using the WB-S/M/L series, use the attachment (OT-WA34).
If you enabled "Borderless Printing”, printing is done with settings for no margins, but
the printing might protrude beyond the paper/label, depending on the actual print posi-
tion and the set position for the label. To make sure printing does not protrude out,
ensure margins of 1.5 mm {0.06"} or more in the print data.
Paper width
Autocutting position
Paper feeding direction
Print area
Paper
Autocutting position
Center of paper width
5.5 mm
183.0 mm
15.0 mm
71.0 mm
265.0 mm
158.4 mm
122.9 mm
Recommended print area for text
and barcodes (*dimension)
38.1 mm
292.1 mm
28.0 mm
24.0 mm
14.6 mm
12.5 mm
10.8 mm
36 mm

Table of Contents

Other manuals for Epson TM-C3500 Series

Related product manuals