228
Scan to setting Available options Description
Remove Shadow On Select On, then select settings for Center to
erase the shadows that appear in the center of a
document when copying a book or Surround to
remove the shadows that appear around a
document when copying thick paper.
Off
Remove Punch Holes On Erases the binding holes on a document. Select
the side of the original with the binding holes and
select the orientation of the original (Up
Direction or Left Direction). Enter the distance
in mm to erase from the edge of the original in
the Erase Amount field.
Off
Subject — Lets you enter a subject for your email
Attached File Max Size Various sizes Lets you select the maximum file size that can
be attached to an email
File Name — Lets you enter a prefix, the date, and the time to
the file name for your scanned file
Parent topic: Starting a Scan Using the Product Control Panel
Starting a Scan Using the Epson Scan 2 Icon
You can start the Epson Scan 2 program to select scan settings, scan, and save the scanned image to a
file.
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the
software described in this section. You also cannot download and install any Epson product software
from the Epson website for use with Windows 10 S; you must obtain software only from the Windows
Store.
• Windows 10: Click and select EPSON > Epson Scan 2.
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select EPSON
> Epson Scan 2 > Epson Scan 2.
• Mac: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2.
To Next Page
Loading...
Need help?
General
