Epson WF-C8690 User Manual

361
7. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges
may be old or damaged and needs to be replaced.
Parent topic: Print Head Cleaning
Related topics
Loading Paper
Print Head Alignment
If your printouts become grainy or blurry or you notice misalignment of vertical lines, you may need to
align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Parent topic: Adjusting Print Quality

Epson WF-C8690 Specifications

General

Print Resolution	4800 x 1200 dpi
Max Print Size	13" x 19"
Print Speed	24 ppm (black), 24 ppm (color)
Automatic Duplex Printing	Yes
Scanner Type	Color Flatbed / ADF
Scan Resolution	1200 x 2400 dpi
ADF Capacity	50 sheets
Fax Speed	33.6 kbps
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print, Mopria
Display	4.3" color touchscreen
Ink Colors	Cyan, Magenta, Yellow, Black
Print Technology	PrecisionCore
Monthly Duty Cycle	75, 000 pages
Connectivity	USB, Ethernet, Wi-Fi
Paper Capacity	330 sheets standard / 1, 830 sheets maximum