Epson WF-C8690 User Manual

77
Note: If you don't see the icon on the LCD screen, you may have selected the wrong network
name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Related references
Status Icon Information
Related tasks
Entering Characters on the LCD Screen
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the home button, if necessary.
2. Press the icon.

Epson WF-C8690 Specifications

General

Print Resolution	4800 x 1200 dpi
Max Print Size	13" x 19"
Print Speed	24 ppm (black), 24 ppm (color)
Automatic Duplex Printing	Yes
Scanner Type	Color Flatbed / ADF
Scan Resolution	1200 x 2400 dpi
ADF Capacity	50 sheets
Fax Speed	33.6 kbps
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print, Mopria
Display	4.3" color touchscreen
Ink Colors	Cyan, Magenta, Yellow, Black
Print Technology	PrecisionCore
Monthly Duty Cycle	75, 000 pages
Connectivity	USB, Ethernet, Wi-Fi
Paper Capacity	330 sheets standard / 1, 830 sheets maximum