Menu Setting Item and Description
Report Settings Last Transmission Report Indicates whether or when the product prints a report
for outgoing faxes. Select Off to turn off report
printing, select On Error to print reports only when an
error occurs, or select On Send to print reports for
every fax you send.
Attach Image to Report
Select On(Large Image) or On(Small Image) to print
the Last Transmission Report with an image of the first
page of the document.
Fax Log Auto Print Indicates whether or when the product prints a fax log
report. Select Off to turn off report printing, select
On(Every 30) to print reports each time 30 fax jobs
are completed, or select On(Time) to print reports at
the specified time.
Report Format Indicates whether to print fax log reports in simple
format or detailed format.
Communication Header
& “Creating header information” on page 99
Dial Tone Detection
When this is set to On, the product starts dialing after
it detects a dial tone. If a dial tone detection error
occurs, you can turn this off. However, doing so may
drop the first digit of a fax number and send the fax to
the wrong number.
If you are connecting the product to a PBX phone
system or terminal adapter, and the dial tone
detection error occurs, change the Line Type setting
to PBX.
& “Setting the line type” on page 96
Fax Speed Indicates the speed at which you transmit and receive
faxes.
ECM Indicates whether or not to use Error Correction Mode
to automatically correct fax data sent/received with
errors due to the line or any other problems. Color
faxes cannot be sent/received when ECM is off.
Line Type
& “Setting the line type” on page 96
Dial Mode Indicates the type of phone system to which you have
connected the product. Depending on the region,
this setting may not be displayed.
Security Settings Auto Erase Backup Data
Select On to automatically erase sent or received
faxes remained in the non-volatile memory of the
product.
Erase Backup Data Completely erases sent or received faxes remained in
the non-volatile memory of the product. If you give
the product to someone else or dispose of it, run this
function in advance.
Check Fax Connection Checks the status of your fax connection.
& “Checking the fax connection” on page 97
User’s Guide
Menu List of Control Panel
130
To Next Page
Loading...
