Setup Mode - Fax Settings
Note:
This function is only available for XP-810 Series.
Menu Setting Item and Description
Send Settings Resolution
& “Fax Mode” on page 118
Contrast
2-Sided Faxing
Direct Send
Send Preview
Receive Settings Auto Answer Turn on to receive faxes automatically.
DRD Indicates the type of answer ring pattern you want to
use to receive faxes. To select an option other than All
(or Off), you must set up your phone system to use
different ring patterns. This option may be On or Off
depending on the region.
Rings to Answer Indicates the number of rings that must occur before
the product automatically receives a fax. Depending
on the region, this setting may not be displayed.
Fax Output
& “Changing the received fax output settings” on
page 100
Remote Receive Allows you to start receiving fax from your cordless
handset whose base unit is connected to the product.
& “Receiving faxes manually” on page 106
Print Settings Auto Reduction Indicates whether large received faxes are reduced in
size to fit on A4-size, or printed at their original size on
multiple sheets.
Collation Stack
Select On to print received faxes from the last page
(print in descending order) so that the printed
documents are stacked in the correct page order.
When the product is running low on memory, this
option may not be available.
Print Inhibit Time Select a time period to stop automatic printing of
faxes or reports during that time. Received faxes are
saved in the product’s memory. Make sure there is
enough free memory before using this function.
User’s Guide
Menu List of Control Panel
129
To Next Page
Loading...
