❏ Make sure that ECM is turned on.
& “Setup Mode - Fax Settings” on page 129
Quality problems (receiving)
❏ Make sure that ECM is turned on.
& “Setup Mode - Fax Settings” on page 129
Answering machine cannot answer voice calls
❏ When auto answer is turned on and an answering machine is connected to the same phone line as this product, set
the number of rings to answer for receiving faxes to a higher number than the number of rings for the answering
machine.
& “Receiving Faxes” on page 105
Incorrect time
❏ The clock may run fast/slow or may be reset after a power failure, or the power is left off for a long time. Set the
correct time.
& “Setting/Changing Time and Region” on page 152
User’s Guide
Troubleshooting for Faxing
196
To Next Page
Loading...
