Printout has a slight slant
❏ Make sure that the paper is loaded into the rear paper feed slot or the paper cassette correctly.
& “Loading Paper” on page 27
❏ If Fast Economy is selected for Paper & Quality Options in the printer driver Advanced window (Windows) or
for Print Quality (Mac OS X) in Print Settings, select another setting.
Size or position of copied image is incorrect
❏ Make sure the paper size, layout, or reduce/enlarge setting selected in the control panel matches the paper used.
❏ If the edges of the copy are cropped off, move the original slightly away from the corner.
❏ Clean the scanner glass.
& “Cleaning the exterior of the product” on page 156
Inverted image
❏ For Windows, clear the Mirror Image check box from the Page Layout window of your printer driver, or turn off
the Mirror Image setting in your application.
For Mac OS X, clear the Mirror Image check box in Print Settings in the Print dialog box of your printer driver, or
turn off the Mirror Image setting in your application.
For instructions, see the online help for your printer driver or for your application.
❏ Uninstall the printer driver, then reinstall it.
& “Uninstalling Your Software” on page 161
Paper or CD/DVD only prints halfway or is blank
❏ If the scanner unit is open for a certain period of time, if data reception is interrupted for a certain period of time, or
depending on your computer or the data, the product may stop printing halfway and the paper or CD/DVD may
be ejected. If the scanner unit is open, close it. The product may resume printing, but if it does not, try printing
again.
❏ Make sure the printer driver settings are appropriate for the paper size you are using.
For Windows, check the Main window.
For Mac OS X, check the Page Setup dialog box or Print dialog box.
❏ For Windows, check the Skip Blank Page setting by clicking the Extended Settings button on the Maintenance
window of the printer driver.
For Mac OS X, select On from the Skip Blank Page. To display the Skip Blank Page, click through the following
menus: System Preferences, Print & Scan (for Mac OS X 10.8 or 10.7) or Print & Fax (for Mac OS X 10.6 or 10.5),
your product (in the Printers list box), Options & Supplies, and then Driver.
❏ Uninstall the printer driver, then reinstall it.
& “Uninstalling Your Software” on page 161
User’s Guide
Troubleshooting for Printing/Copying
182
To Next Page
Loading...
