F
Enter a phone number. You can enter up to 64 digits.
Note:
❏ A hyphen ("-") causes a slight pause when dialing. Only include it in phone numbers when a pause is necessary.
Spaces entered between numbers are ignored when dialing.
❏ If you have set Line Type to PBX and made the access code setting, enter # (hash) at the beginning of the fax
number instead of an external access code.
& “Setting the line type” on page 96
G
Select Done.
H
Enter a name to identify the speed dial entry. You can enter up to 30 characters.
I
Select Done to register the name.
J
Select Options to specify the fax speed you want to use when sending a fax to the recipient. If you do not need to
set the fax speed, select Done.
Note:
If sending a fax to a specific recipient often fails, set a lower fax speed for that recipient. If this is not set, the fax speed set in the
following menu is used instead.
Setup > Fax Settings > Communication > Fax Speed
Setting up group dial entries
You can add speed dial entries to a group, allowing you to send a fax to multiple recipients at the same time. Up to 60
combined speed dial and group dial entries can be entered.
A
Enter Fax mode from the Home menu.
B
Select Contacts.
C
Select Add/Edit Contacts.
D
Select Group Dial Setup. You see the available group dial entry numbers.
E
Select the group dial entry number that you want to register.
F
Enter a name to identify the group dial entry. You can enter up to 30 characters.
G
Select Done to register the name.
User’s Guide
Faxing
98
To Next Page
Loading...
