Epson XP-710 Series - Into the Rear Paper Feed Slot

C
Remove the paper cassette 2.
D
Load paper toward the d arrow mark in the end of the paper cassette 2 with printable face-down.
Load one sheet at a time and leave the end of the paper protruding from the paper cassette.
E
Keep the cassette flat and insert it back into the product carefully and slowly.
Into the rear paper feed slot
Note:
❏ The rear paper feed slot is not available for the XP-610 Series.
❏ Even though you can print on paper with a thickness of 0.05 to 0.6 mm, some hard paper may not be fed correctly even if
the thickness is within this range.
A
Send your print job to the product (from your computer, or by using the control panel).
Note:
Before sending your print job, you cannot load paper into the rear paper feed slot.
User’s Guide
Paper and Media Handling
34