Epson XP-970 Series - Copying by Enlarging or Reducing

7.
Change the other settings as necessary.
“Menu Options for Copying” on page 122
8.
Select the Advanced Settings tab, and then change the settings as necessary.
“Menu Options for Copying” on page 122
9.
Select the Copy tab, and then set the number of copies.
10.
Tap
x .
Note:
❏ If you select Preview, you can check the scanned image.
❏
e
color, size, and border of the copied image are slightly
dierent
from the original.
Copying by Enlarging or Reducing
You can copy originals at a specied magnication.
1.
Load paper in the printer.
“Loading Paper in the Paper Cassette 1” on page 33
“Loading Paper in the Paper Cassette 2” on page 36
“Loading Paper in the Rear Paper Feed Slot” on page 39
2.
Place the originals.
“Placing Originals on the scanner glass” on page 51
3.
Select Copy on the control panel.
4.
Select the Copy tab, and then change the settings as necessary.
“Menu Options for Copying” on page 122
5.
Select the Advanced Settings tab, and then select Reduce/Enlarge.
6.
Specify the magnication to t to the original size and the paper size that you set, and then select OK.
If you select Auto Fit Page, detects the scan area automatically and enlarges or reduces the original to t to the
paper size you selected.
Copying > Copying Originals > Copying by Enlarging or Reducing
125