Expansion:
With borderless copying, the image is enlarged a little to remove borders from the edges of the paper.
Select how much to enlarge the image.
Image Quality:
Adjust the vividness of the colors and correct the color tone.
Clear All Settings:
Resets the copy settings to their defaults.
Copying on 2-Sides
Copy multiple originals on both sides of the paper.
1.
Load paper in the printer.
“Loading Paper in the Paper Cassette 1” on page 33
“Loading Paper in the Paper Cassette 2” on page 36
“Loading Paper in the Rear Paper Feed Slot” on page 39
2.
Place the originals.
“Placing Originals on the scanner glass” on page 51
3.
Select Copy on the control panel.
4.
Select
(2-Sided) on the Copy tab.
5.
Select 1→2-Sided.
6.
Specify Original Orientation and Binding Margin, and then select OK.
You can check the nished image on the right-side of screen.
Copying
>
Copying Originals
>
Copying on 2-Sides
124
To Next Page
Loading...
