6.
Select the photos you want to print from the digital camera, make settings such as the number of copies, and
then start printing.
Printing Photos from a Digital Camera Connected Wirelessly
You can wirelessly print photos from digital cameras that support the DPS over IP standard (from here on referred
to as PictBridge (wireless LAN)).
1.
Make sure the icon that indicates that the printer is connected to a wireless network is displayed on the home
screen.
“Guide to the Network Icon” on page 23
2.
Load paper in the printer.
“Loading Paper in the Paper Cassette 1” on page 33
“Loading Paper in the Paper Cassette 2” on page 36
“Loading Paper in the Rear Paper Feed Slot” on page 39
3.
Select Settings > Camera Print Settings on the control panel.
4.
Select Print Settings or Photo Adjustments and change the settings if necessary.
5.
Connect the digital camera to the same network as the printer.
6.
Display the list of available printers on the digital camera, and then select the printer you want to connect to.
Note:
❏ To check the printer's name, tap the network status icon on the home screen.
❏ If your digital camera has a function that allows you to register printers, you can connect to the printer by selecting it
from the next time.
7.
Select the photos you want to print from the digital camera, make settings such as the number of copies, and
then start printing.
8.
Disconnect the PictBridge (wireless LAN) connection to the printer from the digital camera.
c
Important:
When using PictBridge (wireless LAN), you cannot use other printer functions or print from other devices.
Disconnect immediately when you have nished printing.
Printing on Envelopes
Printing on Envelopes from a Computer (Windows)
1.
Load envelopes in the printer.
“Loading Envelopes in the Paper Cassette 2” on page 41
Printing
>
Printing on Envelopes
>
Printing on Envelopes from a Computer (Windows)
75
To Next Page
Loading...
Need help?
General
