Epson XP-970 Series - Customer Research; Firmware Update; Restore Default Settings

Customer Research
Select the menus on the control panel as described below.
Settings > Customer Research
Select Approve to provide product usage information such as the number of prints to Seiko Epson Corporation.
Firmware Update
Select the menus on the control panel as described below.
Settings > Firmware Update
Update:
Check if the latest version of the rmware has been uploaded to the network server. e rmware is
updated when new
rmware
is found. Once the update has started, it cannot be interrupted.
Notication:
Select On to receive a
notication
if a
rmware
update is available.
Related Information
& “Updating the Printer's Firmware Using the Control Panel” on page 176
Restore Default Settings
Select the menus on the control panel as described below.
Settings > Restore Default Settings
Network Settings
Resets the network settings to the default.
All Except Network Settings
Resets all settings except for network settings to their defaults.
All Settings
Resets all settings to the default.
Product Information > Settings Menu List > Restore Default Settings
309