Epson XP-970 Series - Network Specifications

Interface Specications
For Computer
Hi-Speed USB
*
For External USB Devices and
PictBridge
Hi-Speed USB
*
* USB 3.0 cables are not supported.
Network Specications
Wi-Fi
Specications
Standards
IEEE802.11a/b/g/n
*1
/ac
Frequency Ranges IEEE802.11b/g/n: 2.4 GHz, IEEE802.11a/n/ac: 5 GHz
Channels Wi-Fi 2.4 GHz 1/2/3/4/5/6/7/8/9/10/11/12/13
5 GHz
W52 (36/40/44/48)
*2
, W53 (52/56/60/64)
*2
,
W56 (100/104/108/112/116/120/124/128/132/136/140)
*3
,
W58 (149/153/157/161/165)
*3
Wi-Fi Direct 2.4 GHz 1/2/3/4/5/6/7/8/9/10/11/12/13
5 GHz
W52 (36/40/44/48)
*2
Connection Modes
Infrastructure, Wi-Fi Direct (Simple AP)
*4*5
Security Protocols
*6
WEP (64/128bit), WPA2-PSK (AES)
*7
*1 Only available for the HT20
*2 Use of the product outdoors over these channels is prohibited.
*3 The availability of these channels varies by location. For more information, see http://support.epson.net/wi5ghz/
*4 Not supported for IEEE 802.11b
*5 Infrastructure and Wi-Fi Direct modes or an Ethernet connection can be used simultaneously.
*6 Wi-Fi Direct only supports WPA2-PSK (AES) .
*7 Complies with WPA2 standards with support for WPA/WPA2 Personal
Ethernet Specications
Standards
IEEE802.3i (10BASE-T)
*1
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Ecient Ethernet)
*2
Communication Mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps
Full duplex, 100Mbps Half duplex
Product Information > Product Specications > Network Specications
312