Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
6.
Repeat steps 4 and 5 until the lm is not smeared.
7.
Visually check that the lm is not smeared.
Cleaning the Printer
If the printer’s outer case is dirty or dusty, turn o the printer and clean it with a so, clean, and moist cloth. If you
cannot remove the dirt, try cleaning with a so, clean, and moist cloth moistened with a mild detergent.
c
Important:
❏ Be careful not to get water onto the printer mechanism or any electrical components. Otherwise, the printer
could be damaged.
❏ Never use alcohol or paint thinner to clean the printer cover. ese chemicals can damage the components and
the case.
❏ Do not touch the white,
at
cable or the translucent
lm
inside the printer. Doing so may cause a malfunction.
Maintaining the Printer
>
Cleaning the Printer
170
To Next Page
Loading...
