Checking and Cleaning the Print Head (Control Panel)
1.
Load two or more sheets of A4-size plain paper in the printer.
“Loading Paper in the Paper Cassette 2” on page 36
2.
Select Maintenance on the home screen.
3.
Select Print Head Nozzle Check.
4.
Follow the on-screen instructions to print the nozzle check pattern.
5.
Check the printed pattern to see if the print head nozzles are clogged.
❏ A:
All lines are printed. Select
. No further steps are needed.
❏ B or close to B:
Some nozzles are clogged. Select
, and then select Cleaning on the next screen.
❏ C or worse than C:
If most lines are missing or not printed, this indicates most nozzles are clogged. Select
, and then select
Power Cleaning on the next screen.
6.
Follow the on-screen instructions to perform print head cleaning or Power Cleaning.
7.
When cleaning is nished, print the nozzle check pattern again. Repeat cleaning and printing the pattern until
all lines are printed completely.
c
Important:
If print quality has not improved
aer
repeating nozzle check and head cleaning 2 times, wait for at least 6
hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We
recommend turning o the printer using the
P
button. If print quality has still not improved, run Power
Cleaning.
Related Information
& “Running Power Cleaning (Control Panel)” on page 164
Maintaining the Printer
>
Improving Print, Copy, and Scan Quality
>
Checking and Cleaning the Print Head
162