Epson XP-970 Series User Manual

There is a problem with the network settings on the computer.
Solutions
Try accessing any website from your computer to make sure that your computer's network settings are
correct. If you cannot access any website, there is a problem on the computer.
Check the network connection of the computer. See the documentation provided with the computer for
details.
The device connected to the USB 3.0 port causes radio frequency interference.
Solutions
When you connect a device to the USB 3.0 port on a Mac, radio frequency interference may occur. Try
the following if you cannot connect to wireless LAN (Wi-Fi) or if operations become unstable.
❏ Place the device that is connected to the USB 3.0 port further away from the computer.
❏ Connect to the SSID for the 5 GHz range.
See the following to connect the printer to the SSID.
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 264
The printer has been connected by Ethernet using devices that support IEEE802.3az (Energy
Ecient Ethernet).
Solutions
When you connect the printer by Ethernet using devices that support IEEE802.3az (Energy
Ecient
Ethernet), the following problems may occur depending on the hub or router that you are using.
❏ Connection becomes unstable, the printer is connected and disconnected again and again.
❏ Cannot connect to the printer.
❏ e communication speed becomes slow.
Follow the steps below to disable IEEE802.3az for the printer and then connect.
1.
Remove the Ethernet cable connected to the computer and the printer.
2.
When IEEE802.3az for the computer is enabled, disable it.
See the documentation provided with the computer for details.
3.
Connect the computer and the printer with an Ethernet cable directly.
4.
On the printer, print a network connection report.
“Printing a Network Connection Report” on page 279
5.
Check the printer's IP address on the network connection report.
6.
On the computer, access Web
Cong
.
Launch a Web browser, and then enter the printer's IP address.
“Running Web Cong on a Web Browser” on page 301
7.
Select Advanced Settings from the list at the top right of the window.
Solving Problems > The Printer Does Not Work as Expected > Cannot Start Scanning
209

Epson XP-970 Series Specifications

General

Print Technology	Inkjet
Functions	Print, Scan, Copy
Max Print Resolution	5760 x 1440 dpi
Number of Ink Cartridges	6
Borderless Printing	Yes
Scanner Type	Flatbed
Automatic Document Feeder (ADF)	No
Print Speed (Black)	8.5 ppm
Print Speed (Color)	8 ppm (ISO/IEC 24734)
Ink Cartridge Configuration	Black, Cyan, Magenta, Yellow
Supported Media Sizes	A4, A5, A6, B5, Letter
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Mobile Printing	Apple AirPrint, Google Cloud Print
Display	4.3-inch touchscreen
Copier Speed (Color)	15 cpm
Fax Speed	No fax function
Dimensions	479 x 356 x 148 mm