Epson XP-970 Series - Page 215

"!" is Displayed on the Screen and you Cannot Select Photos
The image le is not supported.
Solutions
"!" is displayed on the LCD screen when the image le is not supported by the product. Use les
supported by the product.
& “Supported Data
Specications
” on page 315
The le name is too long to be recognized by the printer.
Solutions
You can use the following solutions to print photos.
❏ Print from a computer
❏ Print from a smart device using Epson iPrint
You do not need to remove the memory card from your smart device.
Cannot Pinch in or Pinch out
Not enough pressure is being used when pressing on the screen.
Solutions
If you cannot pinch in or pinch out correctly, perform operations while pressing lightly on the screen.
Cannot Save Data to a Memory Device
e following causes can be considered.
A non-supported memory device is being used.
Solutions
Use a memory device supported by the product.
& “Supported Memory Device Specications” on page 314
The memory device is write-protected.
Solutions
Disable write protection on the memory device.
There is not enough free space on the memory device.
Solutions
Delete unnesesary data or insert another memory device.
Solving Problems > The Printer Does Not Work as Expected > Cannot Operate the Printer as Expected
215